Search:
Phone:86-516-83306288
Fax:86-516-87778228
mobile:(0)13705209318
(0)13905217915
(0)13705208238
Address:Xuzhou Economic Development Zone Tongshan Third Industrial principal Hing
Home >> Productshow >>

Productshow

The DY-Ⅳ ※ Belt Conveyor pressure


The belt conveyor pressure with a device is a patented product of our company. The device without power after installation instead of variable slope and faults caused by the overlap of two or more belt conveyor transport, completely solve the power-saving provincial people, reduce the the device initial investment characteristics. Can improve the safety of the transport system in the case of the next transported, can solve operates under the brake to prevent fly zone. Has a simple structure, easy installation, stable operation, and a small amount of maintenance.
Using the parameters:
1. The sloping angles: ≤ 18 ° (upper and lower variable slope can exist) bandwidth :500-2000mm
2. Models: all belt conveyor drag coefficient: K = 1.08
3. Installation number: not limited to, (a belt conveyor can be installed as required more than one)
more than one)
Dimensions:

Bandwidth (mm)

650

800

1000

1200

Pressure with device dimensions

3000×920×1250

3000×1100×1300

3200×1300×1500

3500×1580×1800

(L × W × H)mm


When the scene, would you please consider using the pressure with a device:
In a transport system, haulage variable slope must be more than one belt conveyor lap transport, the most suitable for this pressure with a device, the provincial workers, saving Province device Province installation, provincialelectronic control (see Figure).


Tunnel gap in the transport system, you can use the pressure with a device, belt conveyor of streamers causes completely avoid overlap, a continuous belt conveyor transport.

Pledge:
Selection consulting, technical guidance, and to ensure that the product upgrading and lifelong after-sales service.
Company commitment:
Within 36 hours and sent officers to solve the user everything difficult.